(no commit message)

[reminder] / getting_boot_messages_through_a_serial_line.mdwn

diff --git a/getting_boot_messages_through_a_serial_line.mdwn b/getting_boot_messages_through_a_serial_line.mdwn
index 4b4b134d40e4e34cdb87e07510e9433490447bc6..495244209bbadeecb6e91da6c98d38ec2d12f418 100644 (file)
--- a/getting_boot_messages_through_a_serial_line.mdwn
+++ b/getting_boot_messages_through_a_serial_line.mdwn
@@ -13,7 +13,7 @@ are too early in the boot process. In that case, and if your hardware
 allows, you will have to plug in some serial port extension card.
 
 I will in the following limit the scope to what I use: the IA-32
-and derived architectures, but any information about other ones
+and derived architectures, but any information about other ones is
 welcome.
 
 # Controlling boot through the serial line 
@@ -69,7 +69,7 @@ It is covered in that  page: [[recovering_when_locked_out_from_your_computer]].
 
 ## The other end of the serial line: hardware terminal or emulation
 
-In any case, you will need a [emergency null modem] to link the
+In any case, you will need a [null modem](http://www.lammertbies.nl/comm/info/RS-232_null_modem.html) to link the
 booting host and the terminal (real dumb serial terminal or computer
 running an emulator).